Our IP-fix mounting system for corrugated roof is easy to install in 5 simple steps. It can be used at both existing roofs and newly constructed ones. Just lift up the roof screws 30mm where necessary and position our BP corrugated brackets. Once it is properly positioned it can be tightened. Now the BP mounting profile can be attached to the bracket by inserting the hammer head bolts and tighten the flare nut clockwise to fasten it. Next step is to secure the IP-fix in the correct position and then just click in the IP insert profile. If this is done you only have to insert the solar panel and you are ready.
Our IP-fix mounting system for steel roof is easy to install in 4 simple steps. Start with measuring the positions of the holes and drill those. For mounting the IP-fix, use the rubber underlay, the rivet and riveting machine. Once this IP-fix is fixed just click in the IP insert profile. Once this is done you only have to insert the solar panel and you are ready.
Our IP-fix mounting system for roof tile is easy to install in 5 simple steps. The roof tiles must be pushed up horizontally so you can add wooden strips. Stretch a string horizontally and place the wooden hooks at the right positions. Once those are installed the BP mounting profile can be attached to the bracket by inserting the hammer head bolts and tighten the flare nut clockwise to fasten it. Next step is to secure the IP-fix in the correct position and then just click in the IP insert profile. If this is done you only have to insert the solar panel and you are ready.
